Phone:13410487931

News

Product Category
LED Traceable LC OM3 Fiber Patch Cord Cable
LED Traceable Fiber patch cord provides a fast and accurate method of identifying the endpoint of optical patch cords. Each end of the Tracer fiber patch cord features a flashing light allowing technicians to visually trace individual patch cords from one end to another without pulling or affecting the patch cord. We can provide special power sources which are easily attached to the Traceable fiber patch cord. This causes the LED on each end to keep flashing 30s and stay in lit. Simple LED tool to apply power to one end of jumper to easily identify the far end of a jumper in connected area. Traceable Fiber Optic Patch Cable must be working with the power driving to identify the exact cable.
Fiber Cable Type: Duplex Optical Fiber Cable
Fiber Type: OM3 MM 501/125um
Cable Jacket & Color: LSZH Jacket in Aqua color
Exterior Cable diameter: 2.0mm
Patch Cable Length: 3meters
Connector Type on both sides: LC/PC to LC/PC
Insertion Loss (max.): LC/PC ≤0,3 dB
Return Loss: LC/PC ≥50dB
Radius of curvature: 30 mm
Cycles: >1000 insertions
Maximum Allowable Load Single fiber Cord: 30N
Maximum traction Rupture Single fiber Cord: 200 N
Standards: EN 50377-7-4; IEC 61754-20; EN 50377-4-2; ITU-T G.652
Main function: Traceable fiber patch cords
No need to pre-labeling
LED light blinks every 2 seconds, and persists after 30 seconds
Easy and quick identification
Fiber Type: Single-mode (9/125) or MM OM3 and OM4 DX 2.0mm Cable
Connector Type: SC,FC,ST,LC optional
Low insertion loss and High return loss
Good repeatability, changeability and temperature stabilization