Technical Specifications
| Model | AV6481 Fiber Fusion Splice |
| Motor qty | 6 Motors |
| Alignment method | Cladding alignment, manual alignment |
| Applicable fibers | Any common optical fibers, rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651~653, ITU-TG.655 and ITU-TG.657. |
| Optical fiber diameter | Cladding: 80～150μm, coating layer: 0.1～3mm |
| Cleave length |
5～16mm（coated optical fiber diameter≤250μm）；
10mm（coated optical fiber diameter：0.25~3mm）; |
| Splice loss（typical） | 0.02dB（SMF）; 0.01dB（MMF）; 0.04dB（DSF）; 0.04dB（NZDSF） |
| Return loss | Better than 60dB |
| Splicing time (typical) | 7s (Fast mode) |
| Heating time (typical) | 28s（60mm protection sleeve） |
| Tension | 1.96～2.25N |
| Protection sleeve | 60mm, 40mm and a series of protection sleeves |
| Graphical display | High-performance 4.3 inch LCD |
| Magnification time | 320 times/88 times |
| Fusion records | 10000 groups |
| Remote maintenance | N/A |
| Battery capacity | 11.1V, 6800mAh |
| Battery service life | Cycle charging: 300～500 counts, can be replaced by customers |
| Electrode service life | Typical: 4000 counts, can be replaced by customers |
| Construction lighting | Built-in lights with high-brightness and wide lighting area |
| Working environment | Temp:-10～50℃；Hum: 0～95%RH，height above sea level: 0～6000m |
| Operation interfaces | GUI (graphical user interfaces) |
| External power | AC: 100～240V, 60Hz, 0～1.5A; DC: 10～15V |
| Port | USB / SD |
| Dimensions | 120mm（W）×130mm（H）×154mm（D）（without rubber anti-vibration pad） |
| Weight | 1.7kg （the battery not included）, 2.0kg（included the battery） |
1. Precise fiber core alignment, ultra-low fiber fusion splicing consumption
2. 7s fast fusion splicing, 18s highly efficient heating.
3. 320 times image magnification, 5mm fusion splicing for fibers of ultra-short cutting length
4. 300 groups of fusion splicing modes, 100 groups of heating modes
5. 10000 groups of fusion records, 64 images storage
6. Ceramic presser foot, ceramic V-block, all-in-one fixture
7. Dual-direction splicing, automatic splicing, intelligent pyrocondensation
8. USB and SD card interfaces, U-disk automatic software upgrade
9. Built-in modular lithium battery, supports 220 times of splicing and heating cycles
2. 7s fast fusion splicing, 18s highly efficient heating.
3. 320 times image magnification, 5mm fusion splicing for fibers of ultra-short cutting length
4. 300 groups of fusion splicing modes, 100 groups of heating modes
5. 10000 groups of fusion records, 64 images storage
6. Ceramic presser foot, ceramic V-block, all-in-one fixture
7. Dual-direction splicing, automatic splicing, intelligent pyrocondensation
8. USB and SD card interfaces, U-disk automatic software upgrade
9. Built-in modular lithium battery, supports 220 times of splicing and heating cycles